Slitter Rewinder with Laminating Unit

Duplex Center Drive Slitter With Laminating Unit

Model:HDF-904L

Main Use
CCL and plastic film laminating and slitting process.
Main Features
Laminating unit is installed in the body.
Angle of infeed and outfeed roller of slitting unit can be adjusted.
Rewinding shafts are Air Friction type with 2 air circuit.
One is for tension control and the other one is for core chucking.
Web width 300 - 750mm Slitting method

Tangent shear slitting

Wrap shear slitting

Roller width 800mm
Unwinding dia.

Main roll

φ500mm

Sub roll

φ500mm Mechanical speed 150m/min.
Unwinding core size  3/6 inches Laminating unit

Pressured by pneumatic cylinder

Peel off roller for adhesive material

Cleaner roller as an option.

Rewinding dia. φ400mm
Rewinding core size 3 inches

*Specifications can be customized according to your requirements.

Duplex Center Drive Slitter With Laminating Unit

Model:HDF-938L

Main Use
Optical film laminating and slitting process.
Main Features
Laminating unit is installed in the body.
Duct vacuum unit and cleaner roller are installed as the dust countermeasure.
Automatic cross cutting unit for the rewinding end is installed.
Web width 1800mm Slitting method

Wrap shear slitting

Roller width 1900mm
Unwinding dia.

Main roll

φ800mm

Sub roll

φ800mm Mechanical speed 100m/min.
Unwinding core size  3/6 inches Laminating unit

Pressured by pneumatic cylinder

Peel off roller for adhesive material

Cleaner roller after slitting

Rewinding dia. φ750mm
Rewinding core size 3/6 inches

*Specifications can be customized according to your requirements.

Page Top