Paper Slitter Rewinder
Automatic Surface Drive Slitter Rewinder
Model:ASW-1250R
- Main Use
- Receipt roll, FAX roll etc.
- Main Features
- Coreless and non adhesive winding.
- Automatic processing including packaging operation.
- End mark printing, pressing and side face printing are also automated.
| Web width | 1100mm | Min. slitting width |
35mm |
|---|---|---|---|
| Roller width | 1250mm | Slitting method |
Wrap shear slitting |
| Unwinding dia. | φ1000mm | Mechanical speed | 300m/min. |
| Unwinding core size | 3 inches |
Rewinding method |
With core Coreless Non adhesive |
| Rewinding dia. | φ45 - 120mm | ||
| Rewinding core size | φ18 - 33mm |
*Specifications can be customized according to your requirements.
Single Shaft Center Drive Slitter
Model:HSF-12XI
- Main Use
- Silicon paper
- Main Features
- Suitable for silicon paper slitting.
- To prevent the slip, large and high capacity suction roller is installed.
- High precision winding by shaft bending correction device and support roller.
| Web width | 1750mm | Min. slitting width |
200mm |
|---|---|---|---|
| Roller width | 1850mm | Slitting method |
Wrap shear slitting |
| Unwinding dia. | φ1500mm | Mechanical speed | 600m/min. |
| Unwinding core size | 3/6 inches |
Suction roller |
φ450mm |
| Rewinding dia. | φ1500mm | shaft bending correction device | Reverse moment generation mechanism |
| Rewinding core size | 3/6 inches | Support roller | Automatic pressure control |
*Specifications can be customized according to your requirements.
Surface Drive Slitting Rewinder
Model:HSW-12XN
- Main Use
- Various paper
- Main Features
- For jumbo paper roll.
- Automatic slitting position NC device is installed.
- Wide range from a low to high tension control.
Video
| Web width | 2400mm | Rewinding core size |
3/6 inches |
|---|---|---|---|
| Roller width | 2500mm | Min. slitting width |
135mm |
| Unwinding dia. | φ2000mm | Slitting method | Tangent shear slitting |
| Unwinding core size | 3/6 inches |
Mechanical speed |
1200m/min. |
| Rewinding dia. | φ2000mm | Rewinding method | Surface drive type |
*Specifications can be customized according to your requirements.
Single Shaft Center Drive Slitter Rewinder
Model:HSF-906
- Main Use
- Various paper
- Main Features
- High precision rewinding by touch roller with precision regulator.
- Hydraulic power lifter for unloading the finish roll is installed.
- Exchangeable rewinding shaft, 3 inches and 2 inches.
| Web width | 900mm | Rewinding core size |
2/3 inches |
|---|---|---|---|
| Roller width | 1000mm | Min. slitting width |
8mm |
| Unwinding dia. | φ1000mm | Slitting method | Wrap shear slitting |
| Unwinding core size | 3/6 inches | Mechanical speed |
250m/min. |
| Rewinding dia. | φ650mm |
*Specifications can be customized according to your requirements.
Duplex Turret Slitter Rewinder
Model:HDT-203
- Main Use
- Label
- Main Features
- Turret rewinder for improving productivity.
- Counting the number of carried labels and cuts the end when the counted number reaches the set number.
- The various sensors detect the defect such as separation and gap of label.
| Web width | 270mm | Min. slitting width |
20mm |
|---|---|---|---|
| Roller width | 300mm | Slitting method |
Wrap shear slitting |
| Unwinding dia. | φ800mm | Mechanical speed | 200m/min. |
| Unwinding core size | 3 inches | Option |
Trimming winder Trimming cut blower Inspection unit |
| Rewinding dia. | φ300mm | ||
| Rewinding core size | 3 inches |
*Specifications can be customized according to your requirements.
Single Shaft Center Drive Slitter Rewinder
Model:HSF-904
- Main Use
- Label
- Main Features
- Standard slitter rewinder for label.
- Counting the number of carried labels and cuts the end when the counted number reaches the set number.
- The various sensors detect the defect such as separation and gap of label.
| Web width | 350mm | Min. slitting width |
20mm |
|---|---|---|---|
| Roller width | 400mm | Slitting method |
Wrap shear slitting |
| Unwinding dia. | φ650mm | Mechanical speed | 250m/min. |
| Unwinding core size | 3 inches | Option |
Splicing table Trimming unit Inspection unit |
| Rewinding dia. | φ450mm | ||
| Rewinding core size | 3 inches |
*Specifications can be customized according to your requirements.