Narrow width Slitter Rewinder

Cantilever Micro Slitter Rewinder

Model:HNN-30+H2F

Main Use
Cover tape, One side adhesive tape
Main Features
Minimum slitting width 0.5mm.
Shaft rewinding or Traverse winder rewinding are selectable.
Angle of infeed and outfeed roller of slitting unit can be adjusted.
Web width50 - 200mmMin. slitting width

0.5mm

Roller width250mmSlitting method

Tangent shear slitting

Wrap shear slitting

Unwinding dia.φ1000mm
Unwinding core size3/6 inchesMechanical speed120m/min.
Rewinding dia.φ350mm

Rewinding method

Bearing friction shaft

Traverse winder

Rewinding core size3 inches

 

*Specifications can be customized according to your requirements.

Duplex Center Drive Micro Slitter Rewinder

Model:HIS-104

Main Use
Top tape, Bottom tape
Main Features
Rewinding shafts are specialized micro friction type with high precision tension control.
Splicing table with vacuum unit.
Web width 400mm Min. slitting width

5mm

Roller width 500mm Slitting method

Wrap shear slitting

Unwinding dia. φ1000mm
Unwinding core size 3 inches Mechanical speed 130m/min.
Rewinding dia. φ400mm

Options

Blade unit

Handcart for Blade unit

Rewinding core size 2/3 inches

*Specifications can be customized according to your requirements.

Slitter Rewinder with Traverse Winder

Model:SLT-250+FTW-S

Main Use
Paper carrier tape
Main Features
High-precision slitting by special slitting unit.
Vacuum unit is installed for the dust countermeasure.
Finished rolls can be taken out at the same time by product receiver.
Web width 167mm Min. slitting width

8.0mm

Roller width 250mm Traverse width

100mm

Unwinding dia. φ2050mm Unwinding tension control Open loop by loadcell
Unwinding core size 3 inches Rewinding tension control Open loop by dancer arm
Rewinding width φ152mm

Traverse winder

20 spindles

*Specifications can be customized according to your requirements.

Page Top